Our little guy loves playing with his little farm animals, and I’ve been wanting to find him a little barn for them. I saw a DIY barn on Pinterest recently and it inspired me to make one myself for him. I didn’t have a big tea box to use like in that tutorial, so I started brainstorming about what else I had on hand that I could use. I started picturing some of our favorite barns that we’ve seen at some of the homes nearby, and I had a perfect idea…an empty juice container.
Here are the supplies you will need to make this super simple toy for your own little one:
1. empty juice or milk container
2. sheet of red corrugated 12″x12″ scrapbook paper (I purchased mine at Joann’s)
3. sheet of brown felt
4. sheet of sticky back, stiff white felt
5. glue gun
6. razor blade
9. duct tape
1. I started by thoroughly cleaning and drying the juice box.
2. Then I measured the width of one of the sides (4 inches). I cut up the length of 4 inches along three of the sides of the juice container, starting from the bottom. This created a flap to be the new bottom of the barn. I also cut off the plastic pour spout and trimmed off the tab at the very top of the container that makes the top a bit more pointy.
3. I used duct tape to close and secure the flap to make the new bottom.
4. My son actually picked out this red corrugated cardboard a long time ago when we were shopping for craft supplies, and I had no idea what we were going to use it for. Red is his favorite color, and the corrugated texture makes for a great sensory experience, so I was determined to find a use for it eventually. I realized that it would make the perfect “wood siding” for the barn. I measured the red paper to fit the sides of the carton, and glued on with the glue gun.
5. Next I started with the roof. I used two sheets of felt, one sticky back white and one standard piece of brown felt. The white felt gives some much needed stiffness, and also gives the illusion of painted white trim around the roof. 🙂
6. I measured out a piece of each felt for the roof, approximately 7″ x 5.5″. Then I stuck the brown felt to the sticky side of the white felt, and glued the whole thing on the roof with the glue gun.
7. Then I used more of the sticky white felt to create the barn doors. I sketched out my design on the back (paper covering the sticky side), and cut out with a razor blade (cut over a cutting board).
8. Here are the cut out doors. Next I put the doors on, using a tiny bit of glue from the glue gun.
9. Last step was cutting out the doors with the razor blade.
My little guy immediately took the barn out of the sensory bin, but he has had tons of fun playing with it. He keeps singing E-I-E-I-O when he plays with it. 🙂